Wireless temperature and humidity sensor, quick and easy to install, which reads, in real time, changes in temperature and humidity of incubators or brooders. Readings can be verified by smartphone with the eWeLink app.

Possibility of activating Wifi devices by configuring "Smart Scenes" with the eWeLink app. For example, turning On/Off a device, according to specific conditions like high/low temperature and humidity.

The device is powered with a button cell and in case of low battery, a notification is sent to the smartphone when the remaining battery is less than 10%.

A gateway is required for the sensor to work.

Includes:

• 1x, Wireless Temperature and Humidity Sensor;
• 1x, Instruction Manual;
• 1x, Double-faced adhesive tape;
• 1x, 3V button cell (CR2450);

Function:

• Temperature and humidity sensor;
• It works in communication with a gateway;
• "Smart Scene" setting via smartphone (eWeLink App);
• Possibility of activating Wifi devices in "Smart Scene" via smartphone (eWeLink App);
• Remote reading;
• Verifies reading anytime and anywhere via smartphone (eWeLink App);
• Possibility of trigger a switch by Wifi;
• Wide application: bird and reptile incubators, domestic and exotic poultry brooders;
• Low-battery notification;
• Quick and easy installation;

Technical Data:

• Power: 1x, battery 3V (CR2450);
• Wireless Protocol: ZigBee (IEEE 802.15.4);
• Operating temperature: -10°C ~ 40°C;
• Material: PC (Polycarbonate);
• Weight: 22g;
• Dimensions: 43x43x14mm (WxHxD);